Biochar from co-pyrolysis of biological sludge and sawdust in comparison with the conventional filling media of vertical-flow constructed wetlands for the treatment of domestic-textile wastewater.

A biochar from co-pyrolysis of a mixture of sawdust and biological sludge (70/30, w/w), providing a high environmental compatibility in terms of water leachable polycyclic aromatic hydrocarbons and inorganic elements, together with a remarkable surface area (389 m2/g), was integrated into laboratory-scale vertical-flow constructed wetlands (VF-CWs), planted with Phragmites australis and unplanted. Biochar-filled VF-CWs have been tested for 8 months for the refining of effluents from the tertiary clariflocculation stage of a wastewater treatment plant operating in a mixed domestic-industrial textile context, in comparison with systems filled with gravel. VF-CW influents and effluents were monitored for chemical oxygen demand (COD), nitrogen and phosphorus cycles, and absorbance values at 254 and 420 nm, the latter as rapid and reliable screening parameters of the removal of organic micropollutants containing aromatic moieties and/or chromophores. Biochar-based systems provided a statistically significant improvement in COD (Δ = 22%) and ammonia (Δ = 35%) removal, as well as in the reduction of UV-Vis absorbance values (Δ = 32-34% and Δ = 28% for 254 and 420 nm, respectively), compared to gravel-filled microcosms. The higher removal of organic was mainly attributed to the well-known adsorption properties of biochars, while for nitrogen the biological mechanisms seem to play a predominant role.

Innovative thermally assisted on-line solid phase extraction-reversed phase liquid chromatography applied to targeted nutrimetabolomics in human biofluids.

In this study, the use of thermal desorption in on-line solid phase extraction coupled with reversed phase liquid chromatography (on-line SPE-LC) was for the first time proposed and demonstrated for the desorption of analytes strongly retained by multiple interaction polymeric sorbents. In detail, this analytical strategy was applied to the on-line SPE-LC targeted analysis of a model set of 34 human gut metabolites characterized by heterogeneous physicochemical properties (i.e., octanol-water partition coefficient in the range -0.3 - 3.4). The novel thermally assisted on-line SPE approach was investigated in comparison to conventional room temperature desorption strategies based on the use of (i) an optimized elution gradient or (ii) organic desorption followed by post-cartridge dilution. The thermally assisted desorption strategy has been shown to be better performing and suitable for the development of a reliable and sensitive method for the analysis of the model group of analytes in urine and serum. In more detail, under the optimized experimental conditions, the proposed method provided negligible matrix effects in both biofluids for almost all target analytes. Moreover, method quantification limits were in the ranges 0.026-7.2 µg L-1 and 0.033-23 µg L-1 for urine and serum, respectively, i.e., comparable to or lower than those reported in methods previously published.